Steam Path - Consulting Services » admin

Rogers TG-1 & 2

admin — Tue, 29 Aug 2017 23:20:38 +0000

Turbine	Generator
1000 KW	1563 KVA
1200 KW max	2300 volts
470 PSIG	393 amps
650 F	80% PF
30 PSIG Exh.	30
3600 RPM	60n
S/N 5A2295-1(&-2)	3600 RPM
	120 Exc amps
	125 Exc volts
	S/N 1526P55 & 1527P521

G.E. Steam Turbine Model # 7TDYR 125R137

admin — Fri, 13 Jan 2017 22:39:56 +0000

G.E. Steam Turbine

Model # 7TDYR 125R137

HP 400

RPM 3600

Inlet Steam Pressure 400psig

Inlet Temperature 500 F

Exhaust Pressure 65 psig

Some spares available, including spare rotor. Will rebuild turbine as new.

G.E. Steam Turbine Model # 7TDRY 125R136

admin — Fri, 13 Jan 2017 22:39:27 +0000

G.E. Steam Turbine

Model # 7TDRY 125R136

HP 1190

RPM 3990

Inlet Steam Pressure 400 psig

Inlet Temperature 500 F

Exhaust Pressure 65 psig

Some spares available, including spare rotor. Will rebuild turbine as new.

1007 KW, 60 Hz, Elliott steam turbine generator set with Elliott turbines, Model BYRH-UG

admin — Thu, 05 Jan 2017 20:23:24 +0000

1007 KW, 60 Hz, Elliott steam turbine generator set with Elliott turbines, Model BYRH-UG, Serial number B1002145-C 1, Single stage back pressure style units. Engine, gearbox and generator are mounted in a common skid. The Elliott gearbox reduces the turbine speed of 5750 RPM to a final speed of 1800 RPM to drive a conventional 4-pole, 2-bearing alternator rated 1000kW/1176kVA with 0.85 PF, 163 Amps and wound for 2400/4160V/3/60 Hz service.

Rated Power – 1350HP/1007kW; Rated Turbine Speed – 5750 RPM; Rated Inlet Steam Pressure – Gauge – 599 PSI; Rated Steam Temperature – 750 Deg F; Rated Exhaust Pressure – 155 PSI. Gear Drive is a model # C4 R4, Serial # B102145C-G1, Rated power 1350, Service factor 1.66, High speed shaft;5750, Low speed shaft;1815 , Tag # 802654 C4 2624. Alternater is built by BBC (Brown Boveri) Serial # C36-A076-102, Drive end bearing 6322/C3, opposite drive end bearing 6320/C3. Time rated continuous; Frame # 717, enclosure is drip proof; rated ambient temp. 40 degrees C. With twin Amtek oil coolers and 1.5 hp oil pump.

The package includes generator control and synch panels with scope, no boilers with units.

GE TURBINE – MODEL 7TDRY125R136

admin — Fri, 11 Dec 2015 21:22:36 +0000

(1) GE TURBINE

MODEL 7TDRY125R136

HP 1190

RPM 3990

INLET PRESS 400PSIG

INLET TEMP 500 FTT

EXHAUST PRESS 65 PSIG

AS IS WHERE IS

Can BE REBUILT

SOME SPARE PARTS

CONTACT DAVE GRAHAM OR LEE

(1) GE TURBINE

MODEL 7TDRY 125 R138

HP 458

RPM 3800

INLET PRESS 400 PSIG

INLET TEMP 550 FTT

EXHAUST PRESS 70PSIG

AS IS WHERE IS

CAN BE REBUILT
SOME SPARE PARTS

CONTACT DAVE GRAHAM OR LEE

BWC Generator

admin — Tue, 13 Jan 2015 21:00:18 +0000

The turbine has been totally disassembled and all parts replaced with new
or reconditioned to like new standards. Rotor has been magna-fluxed,
polished, and Balanced. Turbine case has been sandblasted, magna-fluxed, all
sealing surfaces have been either machined or polished and resealed and
assembled with new hardware. Nozzle block was ground and polished for better
steam flow. Hand valve was reconditioned with new valve stem and the
pneumatic cylinder for automatic control replaced. Turbine was reassembled
with new journal and thrust bearings, new carbon shaft seals, and all
clearances set to factory specifications. Steam chest was sandblasted,
magna-fluxed and internal parts were either replaced with new or
reconditioned parts, all valves lapped and blued to ensure seating,
reassembled with new hardware and sealed. The Governor system for the
turbine was upgraded to a Woodward PG for added stability and reliability.
The generator was disassembled, cleaned, checked electrically, rotor was
cleaned, balanced, and reassembled with new ball bearings. Generator was
reassembled and again checked electrically. All of this comes assembled on a
platform with bearing housing cooling system ready to be hooked up to your
chilled water. Switch gear is included with the turbine generator. Switch
gear includes a panel that controls turbine cooling, running and emergency
stop. Specifications are as follows: Elliott DYR-PG Turbine 149 H.P. 3650
rpm max rpm 3750 trip speed 150 PSIG inlet max inlet 250 PSIG, 366 degrees
F. temp inlet max temp. 500 degrees F 0 PSIG exhaust max exh. 60 PSIG Book
100 First critical 9350 rpm Induction Generator G.E. Type Kopig KW 80 KVA
107 PF 75% RPM 2 pole 3600 plus slip rpm Volts 240 Amps 258 HZ 60 Phase 3
Frame 444 US Switch Gear & Panel Controls, switch gear G.E. Controls Red
line

10 MW Biogas to Steam Cogeneration Plant

admin — Thu, 14 Aug 2014 17:04:09 +0000

10 MW Biogas-fired power plant. This complete cogeneration plant is capable of converting methane, landfill gas, biogas, or natural gas into electricity. Perfect for any site that has a supply of gas that needs to be converted to electric power. The plant includes a gas fired boiler, condensing steam turbine, electric generator and condenser. Currently, the entire plant is stored in a warehouse and is packaged for immediate shipment.

125,000 Lbs/Hr Deltak boiler

101,000 Lbs/Hr Terry condensing steam turbine

10 MW Ideal Electrics generator

7,809 sq .ft. Graham condenser

Late model, excellent condition

4,885 HP (3758 KW) Siemens back pressure steam turbine

admin — Tue, 25 Sep 2012 17:31:44 +0000

UNUSED 4,885 HP (3758 KW) Siemens back pressure steam turbine. axial flow design, serial # 5833, Type G-300-2. turbine design speed 6883 rpm, driven machine speed 6883 rpm, turbine speed range 5930-7786 rpm, tripping speed 8565 rpm, main design steam pressure 39.7 bar @ 385 deg C, permissable deviation to 3* 40.7 bar 390 deg C, permissable deviation to 5* 42.74 bar, design pressure at exhaust flange 13.3 bar (may rise to 15.2 bar, may fall to 12.5 bar), Steam consumption 66.8 ton/hr @ 4885 HP.

Stock Number 701560

1495 kW KKK Ltd Back Pressure Turbine Generator, 1530 kW max

admin — Mon, 12 Mar 2012 17:40:09 +0000

Serial # 4555.002
Model CFR 5G5
Integrally geared high efficiency single stage design
29 tonne/hr (max) live steam @ 23 kg/cm2g and 340 deg C
Exhausting back pressure 5.6 to 8.5 kg/cm2g @ 226 to 257 deg C
282 to 1495 kW output
Assumed generator efficiency 89.6 to 95.3%
Mech output 315 to 1569 kW
Turbine speed 10740 rpm, coupling speed 1500 rpm

3000 KW, 3750 KVA, Steam Turbine Generator

admin — Mon, 12 Mar 2012 17:38:13 +0000

This consists of:

(1) steam turbine mfd by WH Allen and Sons, SN T4/7284(7), 4500 HP, speed 10250 rpm, gearbox speed 1500 rpm. Inlet pressure 635 psi @ 670 deg F, exhaust pressure 100 psi.
(1) generator mfd by Bruce Peebles, SN 94359, 1500 rpm, 11000 volt, 50 Hz, Type ‘B’ insulation.
(1) exciter generator, mfd by Westinghouse, 17.6 KW, 18.5 KVA, 1500 rpm, 3 phase, 50 Hz, 30.5 volt.
(1) oil cooler
(1) oil filter
(1) gland condenser
(1) combined stop & emergency valve
(1) control panel