Steam Path - Consulting Services

1495 kW KKK Ltd Back Pressure Turbine Generator, 1530 kW max

admin — Mon, 12 Mar 2012 17:40:09 +0000

Serial # 4555.002
Model CFR 5G5
Integrally geared high efficiency single stage design
29 tonne/hr (max) live steam @ 23 kg/cm2g and 340 deg C
Exhausting back pressure 5.6 to 8.5 kg/cm2g @ 226 to 257 deg C
282 to 1495 kW output
Assumed generator efficiency 89.6 to 95.3%
Mech output 315 to 1569 kW
Turbine speed 10740 rpm, coupling speed 1500 rpm

3000 KW, 3750 KVA, Steam Turbine Generator

admin — Mon, 12 Mar 2012 17:38:13 +0000

This consists of:

(1) steam turbine mfd by WH Allen and Sons, SN T4/7284(7), 4500 HP, speed 10250 rpm, gearbox speed 1500 rpm. Inlet pressure 635 psi @ 670 deg F, exhaust pressure 100 psi.
(1) generator mfd by Bruce Peebles, SN 94359, 1500 rpm, 11000 volt, 50 Hz, Type ‘B’ insulation.
(1) exciter generator, mfd by Westinghouse, 17.6 KW, 18.5 KVA, 1500 rpm, 3 phase, 50 Hz, 30.5 volt.
(1) oil cooler
(1) oil filter
(1) gland condenser
(1) combined stop & emergency valve
(1) control panel

5,250 KW, 50 Cycle, Escher Wyss Steam Turbine Generator Set, with Extraction

admin — Mon, 12 Mar 2012 17:35:12 +0000

Turbine: Escher Wyss
Type REA 1600 Designed for 5,240 KW
Rpm: 6,600
Inlet Pressure: 36 Kp/SqCm @ 410 degrees C
Extraction 1 – non controlled 2800 Kg/H
Extraction 2 – controlled 27,000 Kg/H, pressure 11-14 Kp/SqCm
Generator:Type 14S250, 6600 KVA , COS Phi 0.8, Voltage: 11 KV, 50 Hz.

Elliot YR Series Turbine Reconditioned

admin — Mon, 20 Feb 2012 21:55:11 +0000

Equipment Specification Sheet

Reconditioned with no Governor
Type: Elliot	AYR	BYR	CYR	DYR	BYRH
Maximum initial pressure (psig)	700	700	700	700	700
Maximum initial temperature	825	825	825	825	825
Exhaust pressures (psig)	vac-125	vac-125	vac-90	vac-75	76-305
Speed range (rpm)	800-7400	800-6700	800-6450	800-5760	800-7350
Wheel pitch diameter (in.)	14	18	22	28	18
Number of stages (impulse type)	1	1	1	1	1
Number of rows of rotating blades	2	2	2	2	2
Inlet sizes (in.)	2, 3 & 4	2, 3 & 4	2, 3, 4 & 6	2, 3, 4 & 6	2, 3, 4 & 6
Inlet location (facing governor)	right	right	right	right	right
Exhaust size (in.)	6	8	10	12	8
Exhaust location (r.h. or l.h.)	optional	optional	optional	optional	optional
Centerline height (in.)	12	14	17	22	17
Approx. range of capacities (hp)	to 600	to 1000	to 1500	to 2000	to 3000
Approx. shipping weight	1025	1275	2050	2600	2300

Elliot YR Series Turbines can be built to your steam conditions and horsepower that is required.

One (1) 36 Mw EKM 50 Hz Steam Turbine Generator Set With Direct Heated Kettle

admin — Sat, 18 Feb 2012 00:26:49 +0000

Europe
CTG~STC-2037
Price: Neg
Brand: EKM
Output Capacity: 36Mw
Cycles: 50
Condition: Excellent
Voltage:
Fuel Type:

Offering One (1) 36 Mw 50 Hz. EKM Steam Turbine Generator with Direct Heated Kettle, EKM Type T 25-90
Manufactured in 1972 with 160,000 total working hours.
Kettle:
Make: Babcock, Waterpipe, natural circulation, Gas Heated: 160 t/h, 500C, 76 bara, Commissioned 1993 and working hours since that time are 24,000. Unit has been decommissioned and stored since 1998. Unit comes complete with controls, manuals, ventilators, etc. Efficiency : 92%
Equipment Is In Excellent Condition.

ONE(1)X 1.5 MW 50 HZ.CONDENSING STEAM TURBINE GENERATOR SET

admin — Sat, 18 Feb 2012 00:26:10 +0000

Western Europe
CTG~STC-2036
Brand: Siemens
Output Capacity: 1500Kw
Cycles: 50 Hz.
Condition: Excellent
Voltage: 400V
Fuel Type: Steam

SCOPE OF SUPPLY:

One (1) 1500Kw 50 Hz. Siemens Multistage condensing steam turbine (with extraction), with Single reduction gear box, Synchronous AC Generator, Pipe bundle steam condenser, Control and lubricating oil system complete with oil tank, main oil pump (driven by the turbine shaft), filters, valves, interconnecting
piping, water cooled oil cooler, Inlet combined stop and emergency valve with integral steam strainer,
hydraulic servomotor operated inlet control valves, hydraulic governor, high speed and low speed
couplings, steam seal system, all metal labyrinth type gland packing.

Note: Vacuum system and condensate pumps are not included in the scope of supply.

CONDITION OF THE EQUIPMENT:

Excellent. Steam turbine engine and gear box were subject to general overhaul in 2001. Condenser and
synchronous generator, in very good conditions, can be (depending on the customer’s needs) overhauled
within 30 days.

LOCATION OF THE EQUIPMENT:

The unit is stored in a warehouse and can be inspected with short notice.

DELIVERY TIME:

The STG set is already dismantled and ready for shipment, “ex-works” basis: (steam turbine engine and gear box already overhauled). Manuals and drawings are included.

Two (2) X GEC 30 MW 50 Hz Condensing Steam Turbine Generator Sets

admin — Sat, 18 Feb 2012 00:25:19 +0000

Europe
CTG~STC-2022
Brand: GEC

Output Capacity: 30MW Each
Cycles: 50Hz
Condition: Overhauled
Voltage: 11kV
Fuel Type: Steam
Two (2) X GEC 30 MW 50 Hz Condensing Steam Turbine Generator Sets for immediate sale. These steam turbine generator sets are identical and manufactured in the 1970s. They have 180,000 Hours of service with consistent OEM recommended maintenance. Units were previously used and connected to a public utility. Steam Inlet: 63bar @ 482C. Steam Exhaust: 0.1bar. Generator: 11kV. Units sold As Is/Where Is

Throttle Valve Assembly

admin — Tue, 29 Nov 2011 01:03:37 +0000

Throttle Valve – Main Valve

admin — Tue, 29 Nov 2011 01:02:55 +0000

Throttle Valve Bonnet

admin — Tue, 29 Nov 2011 01:02:00 +0000